| General | |
| Manufacturer | UBIQUITI |
|---|---|
| Model | Ubiquiti UA-G2 |
| Manufacturer Part No | UA-G2 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
UBIQUITI Ubiquiti UA-G2
- Brand Store:UBIQUITI
- Model: Ubiquiti UA-G2
- Availability: Out Of Stock
- Part No: UA-G2
About this item
Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking.
#1: Unlock using an NFC card or UniFi Identity mobile app
#2: Additional handwave unlock functionality
#3: Entry and exit greeting messages
#4: Connects to UniFi Access Hub using PoE
#5: IP55 weather resistance (-30 to 45 C)
UBIQUITI Ubiquiti UA-G2
Mechanical
Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Enclosure materialPolycarbonate, glass
MountingIn wall, gang box
WeatherproofingIP55
Hardware
Networking interface (1) 10/100 MbE RJ45 port
Connectivity BLE 4.1
Power methodPoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range48V DC
Max. power consumption5W
ESD/EMP protectionAir: +15kV, contact: +8kV
SensorsProximity sensor
Speaker(1) 8 ohm, 0.7W
LEDsSteady white: Pending adoption
Steady blue: Adopted
Alternating white/blue: Firmware updating
Strobing red: Emergency lockdown
Steady green: Emergency evacuation
(2) Rapid flashing blue: NFC credential authenticated
(2) Rapid flashing red: NFC credential authentication failed
Breathing blue: Ready to register NFC cards
Button(1) Factory-reset
NFC frequency13.56 MHz
NFC read range< 30 mm
NFC standardsISO 14443A, 14443B, 15693
NFC technologyNFC Tag 1,2,3,4,5
MIFARE Classic
MIFAREPlus
MIFARE Ultralight
MIFARE DESFire
Operating environmentOutdoor use
Ambient operating temperature-30 to 45 C (-22 to 113 F)
Ambient operating humidity5 to 90% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 GradeGrade assignment: I
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02
Software
Management applicationUniFi Access: Version 1.5.9 and later
Tags:Ubiquiti UA-G2 price in DubaiUbiquiti UA-G2 best price in DubaiUbiquiti UA-G2 wholesale price in DubaiUbiquiti UA-G2 affordable price in DubaiUbiquiti UA-G2 discount in DubaiUbiquiti UA-G2 reseller in DubaiUbiquiti UA-G2 distributor in DubaiUbiquiti UA-G2 shop in DubaiUbiquiti UA-G2 service center in DubaiUbiquiti UA-G2 suppliers in DubaiUbiquiti UA-G2 in IranUbiquiti UA-G2 in Abu-DhabiUbiquiti UA-G2 in AfricaUbiquiti UA-G2 in al AinUbiquiti UA-G2 in DubaiUbiquiti Suppliers in DubaiUbiquiti Distributor in DubaiUbiquiti Reseller in DubaiUbiquiti Suppliers Middle EastUbiquiti DubaiUbiquiti Partner in UAEBest Ubiquiti Suppliers in DubaiUbiquiti Distributor
| General | |
| Manufacturer | UBIQUITI |
|---|---|
| Model | Ubiquiti UA-G2 |
| Manufacturer Part No | UA-G2 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
