Cisco MR57 WiFi 6E Indoor Access Point
-
- Brand Store: Cisco
- Model: Cisco MR57
- Availability: In Stock
- Part No: MR57
Key features
#1: Four 4:4 MU-MIMO 802.11ax compatible
#2: 7.78 Gbps tri-radio aggregate frame rate
#3: 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated fourth radio
#4: Integrated Bluetooth Low Energy beacon and scanning radio
#5: Dual 5 Gbps gig ethernet port support
#6: USB 2.0 host interface (Type A connector) with 9.5W power budget
#7: Enhanced transmit power and receive sensitivity
#8: Full-time Wi-Fi location tracking via dedicated third radio
#9: Integrated enterprise security and guest access
#10: Application-aware traffic shaping
#11: Optimized for voice and video
#12: Self-configuring, plug-and-play deployment
Cisco Cisco MR57
Radios 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
6 GHz 802.11ax client access radio
2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy radio with beacon and scanning support concurrent operation of all five radios
Antenna Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz,
5.5 dBi gain at 5 GHz, and 5.5 dBi gain at 6GHz)
802.11ax, 802.11ac Wave 2 and 802.11n capabilities DL-OFDMA, TWT support, BSS coloring
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 6 GHz
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 5 GHz
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz
SU-MIMO, UL and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax
Note: 40MHz channels are supported only in 5 & 6 GHz bands.
Up to 1024-QAM on all three - 2.4 GHz, 5 GHz, and 6 GHz bands
Packet aggregation
Power Power over Ethernet: 42.5 - 57V (PoE+ and 802.3bt compliant)
Alternative 54V DC input via DC adapter
Power consumption: 30W to 40W (802.3bt)
Minimum power requirement: 30W (PoE+, USB is disabled)
Maximum power consumption: 40W
Power over Ethernet injector and DC adapter sold separately.
Note: Actual power consumption may vary depending on the AP usage.
Interfaces 2x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting All standard mounting hardware included (AIR-AP-BRACKET-2)
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
Physical Security Two security screw options (included) (13.5 mm long and 2.5
mm diameter and 5 mm head)
Kensington lock
Concealed mount plate with anti-tamper cable bay
Environment Operating temperature: 32 F - 104 F (0 C - 40 C)
Humidity: 5% to 95% non-condensing
Reliability Mean time between failure (MTBF): 998,440 hrs at +25 C
operating temperature
Physical Dimensions 260 mm x 260 mm x 56 mm, including desk-mount feet or mount plate
Security Integrated layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for guest access and BYOD posturing
Quality of Service Advanced power save (U-APSD)
WMM access categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
Mobility PMK, OKC, and 802.11r for fast layer 2 roaming
Distributed or centralized layer 3 roaming
Analytics Embedded location analytics reporting and device tracking
Global layer 7 traffic analytics reporting per network, per device, and per application
LED Indicators One power/booting/firmware upgrade status
Regulatory RoHS
For additional country-specific regulatory information, please contact Meraki sales
IEEE Standards 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, 802.11w and 802.11
| General | |
| Manufacturer | Cisco |
|---|---|
| Model | Cisco MR57 |
| Manufacturer Part No | MR57 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
| Price | AED 4,200 |
