Mercury Elite 1200 Pro Line Interactive UPS
-
- Brand Store: MERCURY
- Model: Mercury Elite 1200 Pro
- Availability: In Stock
- Part No: UP000128
Key features
#1: Wide input voltage range
#2: Compatible with generators
#3: Overload protection
#4: Short circuit protection
#5: Built-in AVR
#6: Battery deep discharge protection & overcharge protection
#7: Green function ( No load cut off )
MERCURY Mercury Elite 1200 Pro
Input voltage 220VAC
Input frequency 50Hz
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF switch
Input range (220V) 140-300
Rating output (VA). 1200VA
Rating output (W). 720W
Waveform Battery mode(simulated sine wave),AC mode(sine wave)
Power factor 0.6
Rating voltage 220V
Output range 220Vac-7% to +15% in battery mode
Rear Output Socket 4 x Universal - Battery backup
Transfer time TYPICAL4-8ms
Communication Interface optional RS232/RJ11
Rating frequency 50Hz
Line-mode Synchronize with the Utility
Battery mode 50 HzA+1Hz
Line Mode FUSE& firmware protection
Battery Mode Software protection controlled by firmware
Line Mode 110%A+5%; Go to fault mode after 5 minutes, 120%A+5%; Go to fault mode immediately.
Battery Mode 110%A+5%; Shutdown after 5 seconds, 120%A+5%, Shutdown immediately
Rating 2 X 12V/7.5AH (Actual rating 7AH)
Backup time - Typical 20 to 30 mins (depending on load)
Charge current About 1A at normal mode.
Over charge protection 29VA+0.2V stop charging, 27.4+/-0.2V recharge
Dimensions per unit packaging 395x205x258mm
Packsize per Master carton 2
Dimensions per Master carton 410x430x273mm
Download Mercury Elite 1200 Pro Datasheet
| General | |
| Manufacturer | MERCURY |
|---|---|
| Model | Mercury Elite 1200 Pro |
| Manufacturer Part No | UP000128 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Price | AED 231 |
