General
Manufacturer	Cisco
Model	Cisco WS-C2960+24LC-L
Manufacturer Part No	WS-C2960+24LC-L

Cisco (WS-C2960+24LC-L) Catalyst 2960-Plus Network Switch

Brand: Cisco
Model: Cisco WS-C2960+24LC-L
Availability: Out Of Stock
Part No: WS-C2960+24LC-L
chat with Terrabyt.com Bulk Requirement

Cisco 2960 Plus Ethernet Switch - 24 ports - 24 x 10/100 + 2 x combo Gigabit SFP - rack-mountable - PoE

The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst SmartOperations.

2 reviews / Write a review

Cisco (WS-C2960+24LC-L) Catalyst 2960-Plus Network Switch

Description

Device Type Switch - 24 ports - managed

Enclosure Type Rack-mountable 1U

Subtype Fast Ethernet

Ports 16 x 10/100 + 8 x 10/100 (PoE) + 2 x combo Gigabit SFP

Power Over Ethernet (PoE) PoE

PoE Budget 123 W

Performance Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps

Capacity Active VLANs: 64

Jumbo Frame Support 9018 bytes

Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP

Authentication Method RADIUS, TACACS+

Features Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)

RAM 128 MB

Flash Memory 64 MB

Status Indicators Port status, port transmission speed, port duplex mode, power, system, link/activity

Expansion / Connectivity

Interfaces 8 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 16 x 100Base-TX RJ-45 ¦ 2 x 1000Base-T RJ-45 ¦ 2 x SFP (mini-GBIC)

Power

Power Device Internal power supply

Voltage Required AC 120/230 V (50/60 Hz)

Features Redundant Power System (RPS) connector

Miscellaneous

Rack Mounting Kit Optional

Compliant Standards FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24

Software / System Requirements

Software Included Cisco LAN Base software

Dimensions and Weight

Width 17.7 in

Depth 13.1 in

Height 1.7 in

Weight 9.92 lbs

Environmental Parameters

Min Operating Temperature 23 °F

Max Operating Temperature 104 °F

Humidity Range Operating 10 - 95% (non-condensing)

Min Storage Temperature -13 °F