D-link DVX-8025 PRI Module Card
-
- Brand Store: D-LINK
- Model: D-Link DVX-8025
- Availability: Out Of Stock
- Part No: DVX-8025
Key features
- These private exchange 8-port FXS modules support the D-link SPI (Serial Peripheral Interface) internal DVX-8010 bus.
- Voltages and currents (supplied by the e-main control module):
- Logic 3.3 VDC @ up to 0.3 amp
- Low battery voltage (off-hook) -24 to -30 Vdc @ up to 360 Milli-Ampere
- High battery voltage -80 to -92 Vdc produces ring -80-92 Volts ring alternate current, Sinusoidal, software programmable via the Asterisk Peripheral Protocol driver.
- The modules support 100% electronic telephony operation (no relays) based on solid-state SLICs (Subscriber Line Interface Cards), with built-in surge protection of up to 1,500 Volts.
D-LINK D-Link DVX-8025
Additional Functionality
- Caller ID support
- MWI (Message Waiting Indicator) support
- The modules include eight RJ11 ports for line connection. Each port has two LEDs (Light Emitting Diodes).
- The green LED indicates port status:
- Solid Green = off-hook, engaged line
- Blinking green = ringing
- The Red LEDs are used for special indications (on, synchronized, active) when the module is installed on the first (leftmost) position in a DVX-8010.
- Each module has an on-board 16-pin male connector to support the TCO (telecom connector) option on the DVX-8010.
- To assure reliable, long term operation of the FXS modules forced-air cooling is mandatory.
| General | |
| Manufacturer | D-LINK |
|---|---|
| Model | D-Link DVX-8025 |
| Manufacturer Part No | DVX-8025 |
