Kingston KF316C10B/8 8GB 1G x 64-Bit DDR3-1600 CL10 240-Pin DIMM
-
- Brand Store: Kingston
- Model: Kingston KF316C10B/8
- Availability: In Stock
- Part No: KF316C10B/8
About this item
Kingston FURY KF316C10B/8 is a 1G x 64-bit (8GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 240-pin DIMM uses gold contact fingers.
Kingston Kingston KF316C10B/8
#1: JEDEC standard 1.5V Power Supply
#2: VDDQ = 1.5V
#3: 800MHz fCK for 1600Mb/sec/pin
#4: 8 independent internal bank
#5: Programmable CAS Latency: 11, 10, 9, 8, 7, 6
#6: Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
#7: 8-bit pre-fetch
#8: Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
#9: Bi-directional Differential Data Strobe
#10: Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
#11: On Die Termination using ODT pin
#12: Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C
#13: Asynchronous Reset
#14: Height 1.338” (34mm) w/heatsink
Download Kingston KF316C10B/8 Datasheet
| General | |
| Manufacturer | Kingston |
|---|---|
| Model | Kingston KF316C10B/8 |
| Manufacturer Part No | KF316C10B/8 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
| Price | AED 143 |
