Kingston KVR16LN11/8 8GB 2Rx8 1G x 64-Bit PC3L-12800 CL11 240-Pin DIMM
-
- Brand Store: Kingston
- Model: Kingston KVR16LN11/8
- Availability: In Stock
- Part No: KVR16LN11/8
About this item
This document describes ValueRAM's 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low voltage, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 240-pin DIMM uses gold contact fingers.

Kingston Kingston KVR16LN11/8
#1: JEDEC standard 1.35V and 1.5V Power Supply
#2: VDDQ = 1.35V and 1.5V
#3: 800MHz fCK for 1600Mb/sec/pin
#4: 8 independent internal bank
#5: Programmable CAS Latency: 11, 10, 9, 8, 7, 6
#6: Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
#7: 8-bit pre-fetch
#8: Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
#9: Bi-directional Differential Data Strobe
#10: Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm + 1%)
#11: On Die Termination using ODT pin
#12: Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C
#13: Asynchronous Reset
#14: PCB Height: 0.740” (18.75mm) or 1.180” (30.00mm)
Download Kingston KVR16LN11/8 Datasheet

General | |
Manufacturer | Kingston |
---|---|
Model | Kingston KVR16LN11/8 |
Manufacturer Part No | KVR16LN11/8 |
Compatible Country | Middle East, Africa, Iran, Dubai |
Country of Origin | California |
Price | AED 139 |