Kingston KVR16S11S8/4 4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 204-Pin SODIMM Desktop RAM
-
- Brand Store: Kingston
- Model: Kingston KVR16S11S8/4
- Availability: In Stock
- Part No: KVR16S11S8/4
About this item
ValueRAM's KVR16S11S8/4 is a 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold contact fingers.
Kingston Kingston KVR16S11S8/4
#1: JEDEC 1.5V Power Supply
#2: VDDQ = 1.5V
#3: 800MHz fCK for 1600Mb/sec/pin
#4: 8 independent internal banks
#5: Programmable CAS latency: 11, 10, 9, 8, 7, 6, 5
#6: Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
#7: 8-bit pre-fetch
#8: Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
#9: Bi-directional Differential Data Strobe
#10: Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm + 1%)
#11: On Die Termination using ODT pin
#12: Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95Cº
#13: Asynchronous Reset
#14: PCB: Height 1.180” (30.00mm), double sided component
Download Kingston KVR16S11S8/4 Datasheet
| General | |
| Manufacturer | Kingston |
|---|---|
| Model | Kingston KVR16S11S8/4 |
| Manufacturer Part No | KVR16S11S8/4 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
| Price | AED 74 |
