Netis P106C
Netis P106C
Netis P106C
Netis P106C  Netis P106C 
General
Manufacturer NETIS
Model Netis P106C
Manufacturer Part No P106C

Netis P106C 4POE+2RJ45 100M Standard POE Switch

  • NETIS
  • Brand Store:  NETIS   decoration   decoration
  • Model: Netis P106C
  • Availability: Out Of Stock
  • Part No: P106C

Key features

#1: Supporting 802.3 Ethernet, 802.u Faster Ethernet#2: Supports POE IEEE 802.3af/at compliant Powered Device (PD)#3: Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-longtransmission)#4: Ports 1~4 features POE power supply capability and can be used as Power overEthernet devices#5: Auto MDI/MDIX crossover for all ports#6: Support full duplex based on IEEE802.3x and half duplex based on Backpressure#7: Support non-blocking wire speed forwarding#8: MAC address auto-learning & auto-aging#9: Steel case,the total POE power budget of 60W#10: Plug and play

Netis P106C

Netis P106C 4POE+2RJ45 100M Standard POE SwitchHardware

Interface

4*10/100Mbps POE ports(Data/Power)

2*10/100M uplink RJ45 ports (Data)

Basic function

Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control Mode Normal switch mode/Extend mode Data Transfer Rate

Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

Store & Forwarding Yes Switching Capacity 1.2G MAC Address Table Size 2K Jumbo Frame 2048 byte Environment Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing Power Input POE Standards Single port maximum power 30W,

Whole switch maximum power 60W Max

Support over-current,over-voltage and short-circuit protection

Support Soft Start of High Power PD

Support sequential boot-up Power Supply Pin:12+/36-

100-240V 1.5A Max(Input)

52V 1.15A Max(Output)

Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) Dimensions (L x W x H ) 125mm*115mm*34mm



show more
General
Manufacturer NETIS
Model Netis P106C
Manufacturer Part No P106C

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Track Your Order Here Whatsapp +97142380921