Netis P106C
Netis P106C
Netis P106C
Netis P106C  Netis P106C 
General
Manufacturer NETIS
Model Netis P106C
Manufacturer Part No P106C

Netis P106C 4POE+2RJ45 100M Standard POE Switch

About this item

#1: Supporting 802.3 Ethernet, 802.u Faster Ethernet
#2: Supports POE IEEE 802.3af/at compliant Powered Device (PD)
#3: Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-longtransmission)
#4: Ports 1~4 features POE power supply capability and can be used as Power overEthernet devices
#5: Auto MDI/MDIX crossover for all ports
#6: Support full duplex based on IEEE802.3x and half duplex based on Backpressure
#7: Support non-blocking wire speed forwarding
#8: MAC address auto-learning & auto-aging
#9: Steel case,the total POE power budget of 60W
#10: Plug and play

NETIS Netis P106C

Hardware

Interface

4*10/100Mbps POE ports(Data/Power)

  2*10/100M uplink RJ45 ports (Data)

 Basic function

 Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

 Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
 Store-and-forward switching scheme
 Support IEEE802.3X full duplex and Backpressure half duplex
 MAC address auto-learning & auto-aging
 Standards

 IEEE 802.3 10BASE-T Ethernet

 IEEE 802.3i 10BASE-T Ethernet
 IEEE 802.3u 100BASE-TX Fast Ethernet
 IEEE 802.3af/at, Power over Ethernet
 IEEE 802.3x Flow Control
 Mode
 Normal switch mode/Extend mode
 Data Transfer Rate

Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

 Store & Forwarding
Yes
 Switching Capacity
1.2G
 MAC Address
  Table Size
2K
 Jumbo Frame
 2048 byte
 Environment
 Operation Temperature:0℃~40℃
 Storage Temperature:-40℃~70℃
 Operation Humidity:10%~90% RH Non-condensing
 Storage Humidity:5%~90% RH Non-condensing
 Power Input POE
 Standards
 Single port maximum power 30W,

 Whole switch maximum power 60W Max

 Support over-current,over-voltage and short-circuit protection

 Support Soft Start of High  Power PD

 Support sequential boot-up
 Power Supply Pin:12+/36-

 100-240V 1.5A Max(Input)

 52V 1.15A Max(Output)

 Cabling type
 100Base-TX: Cat 5e or better UTP/STP(≤100m)
 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions
(L x W x H )
 125mm*115mm*34mm




show more
General
Manufacturer NETIS
Model Netis P106C
Manufacturer Part No P106C

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Computer Shop

Track Your Order Here Whatsapp +97142380921