Netis P110C
Netis P110C
Netis P110C 
General
Manufacturer NETIS
Model Netis P110C
Manufacturer Part No P110C

Netis P110C 8POE+2RJ45 100M Standard POE Switch

  • NETIS
  • Brand Store:  NETIS   decoration   decoration
  • Model: Netis P110C
  • Availability: Out Of Stock
  • Part No: P110C

Key features

#1: Supporting 802.3 Ethernet, 802.u Faster Ethernet;#2: Supports POE IEEE 802.3af/at compliant Powered Device (PD);#3: Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-long transmission);#4: Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices;#5: Auto MDI/MDIX crossover for all ports;#6: Support full duplex based on IEEE802.3x and half duplex based on Backpressure;#7: Support non-blocking wire speed forwarding;#8: MAC address auto-learning & auto-aging;#9: Steel case,the total POE power budget of 120W;#10: Just Plug and Play.

Netis P110C

Netis P110C 8POE+2RJ45 100M Standard POE SwitchHardware

Interface

8*10/100Mbps POE ports(Data/Power)

2*10/100M uplink RJ45 ports (Data)

Basic function

Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control Mode Normal switch mode/Extend mode Data Transfer Rate

Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

Store & Forwarding Yes Switching Capacity 2G MAC Address Table Size 2K Jumbo Frame 2048 byte Environment Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing Power Input POE Standards Single port maximum power 30W,

Whole switch maximum power 120W

Support over-current,over-voltage and short-circuit protection

Support Soft Start of High Power PD

Support sequential boot-up Power Supply Pin:12+/36-

100-240V 2A Max(Input)

52V 2.3A Max(Output)

Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) Dimensions (L x W x H ) 190mm*140mm*43mm



show more
General
Manufacturer NETIS
Model Netis P110C
Manufacturer Part No P110C

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Track Your Order Here Whatsapp +97142380921