Ubiquiti UA-Intercom
Mechanical Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")Enclosure material Aluminum alloy, UV-stabilized polycarbonate, glassMount material Powder-coated stainless steelMounting Wall mount, adapter to the gooseneck pedestal (Included) Surface angle mount, flush mount (Optional) Sunshield kit (Optional)Weatherproofing IP65
HardwareNetworking interface (1) GbE RJ45 portConnectivity Bluetooth 4.2
NFCPower method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSUSupported voltage range 48V DCMax. power consumption 13WESD/EMP protection Air: +15kV, contact: +8kVSensors Proximity sensor ALS sensorCamera view angle H: 79.4, V: 97.5, D: 118.2Display 177 mm (7") diagonalResolution 1024 x 600 (16:9)Display luminance Max. 1000 nits (typical)Touch screen technology Capacitive multi-touchMicrophone YesSpeaker (1) 4 ohm, 2WLEDs (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25 C but the system funtions normally) (1) LED floodlight (13) Keypad LED backlightButton (1) Factory-resetNFC frequency 13.56 MHzNFC read range < 30 mmNFC standards ISO 14443A, 14443B, 15693NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFireAmbient operating temperature Device: -30 to 60 C (-22 to 140 F) Display: -25 to 60 C (-13 to 140 F) The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)Operating environment Outdoor useAmbient operating humidity 5 to 90% noncondensingSoftware information The software version of a product can be checked at https://unifi.ui.comUL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level IUL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.CAN/ULC-60839-11-1 Grade Grade assignment: ICertifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1Document number,and issue date and/or revision level UA-Intercom, V01
SoftwareManagement application UniFi Access: Version 1.22.17 and later
Tags:
Ubiquiti UA-Intercom price in Dubai Ubiquiti UA-Intercom best price in Dubai Ubiquiti UA-Intercom wholesale price in Dubai Ubiquiti UA-Intercom affordable price in Dubai Ubiquiti UA-Intercom discount in Dubai Ubiquiti UA-Intercom reseller in Dubai