Qnap ES1686Adc 16-Bay Enterprise Active-Active Dual Controller ZFS NAS Storage Array - ES1686Adc-2142IT-128G
-
- Brand Store: QNAP
- Model: Qnap ES1686Adc
- Availability: Out Of Stock
- Part No: ES1686Adc-2142IT-128G
Key features
Dual controllers, each with an Intel Xeon D 8-core processor
Supports 16 x 3.5-inch SAS SSD/HDD or 2.5-inch U.3 NVMe dual-port SSD
Four built-in 10GbE SFP+ ports with 25GbE expansion support
Powered by the QES operating system (ZFS file system) for high IOPS and petabyte-scale storage capacity
Supports 16 x 3.5-inch SAS SSD/HDD or 2.5-inch U.3 NVMe dual-port SSD
Four built-in 10GbE SFP+ ports with 25GbE expansion support
Powered by the QES operating system (ZFS file system) for high IOPS and petabyte-scale storage capacity
Qnap ES1686Adc
| Number of Controller Module | 2 | |
| CPU | Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller | |
| CPU Architecture | 64-bit x86 | |
| Encryption Engine | (AES-NI) | |
| System Memory | 64 GB RDIMM DDR4 ECC per controller | |
| Maximum Memory | 1024 GB (16 x 64 GB) 512 GB (8 x 64 GB) per controller |
|
| Memory Slot | 16 x R-DIMM/LR-DIMM DDR4 8 x R-DIMM/LR-DIMM DDR4 per controller |
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use Registered DIMM (RDIMM) with Load Reduced DIMM (LRDIMM) memory. |
| Flash Memory | 4 GB (Dual boot OS protection) | |
| Drive Bay | 16 x 3.5-inch | SAS 12Gb/s, backward-compatible to SAS 6Gb/s |
| Drive Compatibility | 3.5-inch bays: 3.5-inch SAS hard disk drives 2.5-inch SAS hard disk drives 2.5-inch dual-port U.3 NVMe SSD |
|
| Hot-swappable | ||
| SSD Cache Acceleration Support | L1 ARC Read Cache: RAM L2 ARC Read Cache: SSD ZIL Write Cache: NVRAM (C2F) |
|
| Cache for Copy To Flash (C2F) | 1 per each controller (64 GB M.2 SSD) | |
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 3 for each controller (assign one for remote management) | |
| 10 Gigabit Ethernet Port | 4 x 10GbE SFP+ for each controller | |
| Wake on LAN (WOL) | ||
| Jumbo Frame | ||
| PCIe Slot | 2 per controller Slot 1: PCIe Gen 3 x8 (CPU) Slot 2: PCIe Gen 3 x8 (CPU) |
Card dimensions for PCIe slots 1–2: 215 x 68.9 x 18.76 mm / 8.46 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used. |
| USB 3.2 Gen 1 Port | 2 per each controller | Note: The USB ports are for engineering purposes only. No external devices such as storage drives or UPS are supported. |
| Form Factor | 3U Rackmount | |
| LED Indicators | System Power LED (Green): on/off System Status (Green/Red): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection |
|
| Buttons | Power, Reset | |
| Dimensions (H x W x D) | 132 x 446.2 x 587.75 mm | |
| Weight (Net) | 23.82 kg | |
| Weight (Gross) | 34.63 kg | |
| Operating Temperature | 0–40 °C (32 °F–104 °F) | |
| Storage Temperature | -20–70 °C (-4 °F–158 °F) | |
| Relative Humidity | 5–95% RH non-condensing, wet bulb: 27 °C (80.6 °F) | |
| Power Supply Unit | Redundant/Hot Swap Power Vin: 90–264 VAC; 700 W |
|
| Power Consumption: Operating Mode, Typical | 588.33 W | Tested with drives fully populated. |
| Fan | Hot-swappable fan module (60 × 60 × 38 mm; 16000 RPM/12 V/2.8 A × 3) | |
| System Warning | Buzzer | |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 10000 | |
| Safety Standard | FCC Class A (USA only) CE Mark (EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD |
Download Qnap ES1686Adc Datasheet
| General | |
| Manufacturer | QNAP |
|---|---|
| Model | Qnap ES1686Adc |
| Manufacturer Part No | ES1686Adc-2142IT-128G |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | Taiwan |
