General
Manufacturer	QNAP
Model	QNAP ES1686dc R2
Manufacturer Part No	ES1686dc-R2-2142IT-96G
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	China

QNAP ES1686dc-R2-2142IT-96G High Availability Enterprise NAS with Dual Active Controllers

1 reviews / Write a review

Brand Store: QNAP
Model: QNAP ES1686dc R2
Availability: Out Of Stock
Part No: ES1686dc-R2-2142IT-96G
Chat with Terrabyt.com Bulk Requirement

About this item

#1: Dual active-active controllers

Dual active-active controllers provide supreme uptime and redundancy to ensure high availability.

#2: NVRAM module

NVRAM reduces the risk of losing write cache data if unexpected power failure occurs.

#3: QES operating system

Supports ZFS near-limitless snapshots, SnapSync, block-level data deduplication, and inline data compression.

#4: Storage for virtualization

Supports VMware vSphere, Windows Server and Citrix XenServer for storage virtualization.

#5: 10GbE SFP+ ports

Four 10GbE SFP+ ports (per controller) accelerate virtualization, large file sharing, and intensive data transfer.

#6: PCIe Gen 3 slots

Two PCIe slots (per controller) allow for adding 10GbE/25GbE networking cards to increase application performance.

ES1686dc-R2-2142IT-96G

CPU Intel Xeon D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller

CPU Architecture 64-bit x86

Floating Point Unit Yes

Encryption Engine Yes (AES-NI)

System Memory 48 GB RDIMM DDR4 ECC (4 x 4 GB+4 x 8GB) per controller

Maximum Memory 512 GB (8 x 64GB)

Memory Slot 8 x R-DIMM/LR-DIMM DDR4

IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.

Flash Memory 4GB (Dual boot OS protection)

Drive Bay 16 x 3.5-inch

SAS 12Gb/s, backward-compatible to SAS 6Gb/s

Drive Compatibility 3.5-inch bays:

3.5-inch SAS hard disk drives

2.5-inch SAS hard disk drives

2.5-inch SAS solid state drives

Hot-swappable Yes

SSD Cache Acceleration Support Yes

Read cache only

Cache for Copy To Flash (C2F) 1 per each controller (64GB M.2 SSD)

Gigabit Ethernet Port (RJ45) 3 for each controller (assign one for remote management)

10 Gigabit Ethernet Port 4 x 10GbE SFP+ for each controller

Wake on LAN (WOL) Yes

Jumbo Frame Yes

PCIe Slot 2 per controller

Slot 1: PCIe Gen 3 x8 (CPU)

Slot 2: PCIe Gen 3 x8 (CPU)

Card dimensions for PCIe slot 1~Slot 2：215 x 68.9 x 18.76 mm / 8.46 x 2.71 x 0.74 inches.

Wider cards can be installed if the next PCIe slot will not be used.

USB 3.2 Gen 1 port 2 per each controller

Note: The USB ports are for engineering purpose only. No external devices such as storage drives or UPS are supported.

Form Factor 3U Rackmount

LED Indicators System Power LED (Green): on/off

System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged

LCD Status Display (Two-digit number): Status of JBOD connection

Buttons Power, Reset

Dimensions (HxWxD) 132 x 446.2 x 587.75 mm

Weight (Net) 30.22 kg

Weight (Gross) 34.92 kg

Operating Temperature 0 - 40 C (32F - 104F)

Storage Temperature -20 - 70C (-4F - 158F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit Redundant/ Hot Swap Power Vin:90~264VAC;700W

Power Consumption: Operating Mode, Typical 500.87 W

Tested with drives fully populated.

Fan Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)

System Warning Buzzer

Standard Warranty 5

Max.(CIFS) - with Max. Memory 10000

Safety Standard FCC Class A (USA only)

CE Mark ( EN55022 Class A, EN55024)

EN60950

BSMI

VCCI

LVD

Download QNAP ES1686dc R2 Datasheet

General
Manufacturer	QNAP
Model	QNAP ES1686dc R2
Manufacturer Part No	ES1686dc-R2-2142IT-96G
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	China