Teltonika RUTX11
General
Manufacturer TELTONIKA
Model Teltonika RUTX11
Manufacturer Part No RUTX11
Item Code 054610002

Teltonika RUTX11 Industrial Cellular Router

  • TELTONIKA
  • Brand Store:  TELTONIKA   decoration   decoration
  • Model: Teltonika RUTX11
  • Availability: Out Of Stock
  • Part No: RUTX11

Key features

4G LTE CAT 6Cellular speeds up to 300Mbps with Carrier AggregationDUAL SIMWith auto failover, backup WAN and other switching scenariosWIFI & BTWave-2 802.11ac Dual Band WIFI and Bluetooth LEGNSSGlobal Navigation Satellite System for location services and time synchronizationPROTOCOLSMultiple protocols supported including MQTT, Modbus TCP, BGP, GRERMSCompatible with Teltonika Remote Management System

Teltonika RUTX11

DescriptionMobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 MbpsSIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection failStatus Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCIDSMS SMS status,SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replyUSSD Supports sending and reading Unstructured Supplementary Service Data messagesBlack/White list Operator black/white listMultiple PDN Possibility to use different PDNs for multiple network access and servicesBand management Band lock, Used band status displayAPN Auto APNBridge mode Direct connection (bridge) between mobile ISP and device on LANWIRELESSWireless mode 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)WiFi security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separationESSID ESSID stealth modeWiFi users up to 150 simultaneous connectionsWireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing pageETHERNETWAN 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverBLUETOOTHBluetooth 4.0 Bluetooth low energy (LE) for short range communicationNETWORKRouting Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNAVoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewall Port forwards, traffic rules, custom rulesDHCP Static and dynamic IP allocation, DHCP Relay, RelaydQoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNS Supported >25 service providers, others can be configured manuallyNetwork backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic FailoverLoad balancing Balance Internet traffic over multiple WAN connectionsSSHFS Possibility to mount remote file system via SSH protocolSECURITYAuthentication Pre-shared key, digital certificates, X.509 certificatesFirewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLAN Port and tag based VLAN separationMobile quota control Custom data limits for both SIM cardsWEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess control Flexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPN Multiple clients and a server can run simultaneously, 12 encryption methodsOpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCIPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)GRE GRE tunnelPPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 supportStunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPN Method of building scalable IPsec VPNsSSTP SSTP client instance supportZeroTier ZeroTier VPN client supportWireGuard WireGuard VPN client and server supportMODBUSMODBUS TCP SLAVEID filtering Respond to one ID in range [1;255] or anyAllow remote access Allow access through WANCustom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionalityMODBUS TCP MASTERSupported functions 01, 02, 03, 04, 05, 06, 15, 16Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCIIMQTT GATEWAYGateway Allows sending commands and receiving data from MODBUS Master through the MQTT brokerDNP3Supported modes TCP Master, DNP3 OutstationDATA TO SERVERProtocols HTTP(S), MQTT, Azure MQTT, KinesisMONITORING & MANAGEMENTWEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel logFOTA Firmware update from server, automatic notificationSSH SSH (v1, v2)SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GETCall Reboot, Status, Mobile data on/off, Output on/offTR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTT MQTT Broker, MQTT publisherSNMP SNMP (v1, v2, v3), SNMP trapJSON-RPC Management API over HTTP/HTTPSMODBUS MODBUS TCP status/controlRMS Teltonika Remote Management System (RMS)IoT PLATFORMSClouds of things Allows monitoring of: Device data, Mobile data, Network info, AvailabilityThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IPAzure IoT Hub Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub serverSYSTEM CHARACTERISTICSCPU Quad-core ARM Cortex A7, 717 MHzRAM 256 MB, DDR3FLASH storage 256 MB, SPI FlashFIRMWARE / CONFIGURATIONWEB UI Update FW from file, check FW on server, configuration profiles, configuration backupFOTA Update FW/configuration from serverRMS Update FW/configuration for multiple devices at onceKeep settings Update FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating system RutOS (OpenWrt based Linux OS)Supported languages Busybox shell, Lua, C, C++Development tools SDK package with build environment providedLOCATION TRACKINGGNSS GPS, GLONASS, BeiDou, Galileo and QZSSCoordinates GNSS coordinates via WebUI, SMS, TAVL, RMSNMEA NMEA 0183Server software Supported server software: TAVL, RMSGeofencing Configurable multiple geofence zonesUSBData rate USB 2.0Applications Samba share, USB-to-serialExternal devices Possibility to connect external HDD, flash drive, additional modem, printerStorage formats FAT, FAT32, NTFSINPUT/OUTPUTInput 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic highOutput 1 x Digital Output, Open collector output, max output 30 V, 300 mAEvents SMS, Email, RMSPOWERConnector 4 pin industrial DC power socketInput voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standardsPower consumption 16 W MaxPHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)Ethernet 4 x RJ45 ports, 10/100/1000 MbpsI/Os 1 x Digital Input, 1 x Digital Output on 4 pin power connectorStatus LEDs 4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G WiFiSIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holdersPower 1 x 4 pin DC connectorAntennas 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSSUSB 1 x USB A port for external devicesReset Reboot/User default reset/Factory reset buttonOther 1 x Grounding screwPHYSICAL SPECIFICATIONCasing material Aluminium housing with DIN rail mounting optionDimensions (W x H x D) 115 x 44.2 x 95.1 mmWeight 456 gMounting options DIN rail, flat surface placementOPERATING ENVIRONMENTOperating temperature -40 C to 75 COperating humidity 10 % to 90 % non-condensingIngress Protection Rating IP30REGULATORY & TYPE APPROVALSRegulatory & Type Approvals CE/RED, RoHS, REACHVehicle ECE R10 (E-mark)EMI IMMUNITYStandards EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0ESD EN 61000-4-2:2009RS EN 61000-4-3:2006+A1:2008+A2:2010EFT EN 61000-4-4:2012Surge protection EN 61000-4-5:2014CS EN 61000-4-6:2014DIP EN 61000-4-11:2004RFStandards ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1SAFETYStandards IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017



show more
General
Manufacturer TELTONIKA
Model Teltonika RUTX11
Manufacturer Part No RUTX11

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Track Your Order Here Whatsapp +97142380921