Wi-Tek WI-PCES226GF 24 x 10/100Mbps RJ45 PoE Ports, 2*1000Mbps Combo SFP Cloud Easy Smart 250m PoE Switch
-
- Brand Store: WI-TEK
- Model: Wi-Tek WI-PCES226GF
- Availability: Out Of Stock
- Part No: WI-PCES226GF
About this item
- Cloud easy smart 250m PoE switch
- 24 x 10/100Mbps RJ45 PoE Ports, 2*1000Mbps Combo SFP
- Port1-4:802.3af/at/bt, Port5-24:802.3af/at, total PoE power budget is 280W
- Support Wi-Tek Cloud management, mobile APP remote maintenance
- Smart DIP Mode: Extend mode, VLAN mode, PD Alive mode
- Support various real-time alarms, even novices can troubleshoot
- Support Onvif protocol to automatically identify IP camera, unique value for CCTV network
Buy Wi-Tek WI-PCES226GF 24 x 10/100Mbps RJ45 PoE Ports, 2*1000Mbps Combo SFP Cloud Easy Smart 250m PoE Switch
| WI-PCES226GF Specifications | |
|---|---|
| Model | WI-PCES226GF |
| Hardware Version | V1 |
| Interfaces | |
| Downlink Ports | 24 × 10/100Mbps RJ45 PoE Ports |
| Uplink Ports | 2 × 1000Mbps Combo SFP |
| PoE | |
| PoE Ports | Ports 1–24 |
| PoE Standard | Port 1–4: IEEE 802.3bt (90W) Port 5–24: IEEE 802.3af/at (30W) |
| PoE Pin Assignment | Port 1–4: 1/2(+), 3/6(-), 4/5(-), 7/8(+) Port 5–24: 1/2(+), 3/6(-) |
| PoE Power Budget | 280W |
| Performance | |
| Memory | 8KB |
| Flash | 16MB |
| Switching Capacity | 8.8 Gbps |
| Packet Forwarding Rate | 6.56 Mpps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4 Mbit |
| Jumbo Frame | 9216 Bytes |
| Switch Properties | |
| Forwarding Mode | Store and Forward |
| Standards & Protocols | IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3af (PoE) IEEE 802.3at (PoE+) |
| Power Supply | |
| Input Power | AC 100–240V, 50/60Hz |
| Power Consumption | Idle: 5.1W Full Load (PoE): 285W |
| LED Indicators | |
| PWR (Green) | On: Power normal; Off: Power off/failure |
| Link (Green) | On: Connected; Off: Disconnected; Blinking: Data transmission |
| PoE (Orange) | On: PD connected and powered; Off: No PD connected |
| PoE Max (Green) | On when PoE usage > 80% of budget |
| Buttons | DIP Switch: 1. Extend: Up to 250m PoE at 10Mbps 2. VLAN: Port isolation, each PoE port can only send to uplink 3. PD Alive: Auto-reboot offline PDs Reset: Hold >5s to restore factory settings |
| Physical Characteristics | |
| Fan Quantity | 2 |
| Switch Dimensions | 440 × 207 × 44 mm |
| Package Dimensions | 315 × 202 × 82 mm |
| Net Weight | 2.74 kg |
| Package Weight | 3.39 kg |
| Installation | Desktop / Rack-mounted |
| Environmental | |
| Operating Temperature | -10℃ to 50℃ (14℉ to 122℉); 10%–90% RH (non-condensing) |
| Storage Temperature | -40℃ to 70℃ (-40℉ to 158℉); 5%–90% RH (non-condensing) |
| Reliability | |
| Surge Immunity (IEC 61000-4-5) | Common mode: 4kV, Differential mode: 2kV |
| ESD Protection (IEC 61000-4-2) | Contact: 6kV, Air: 8kV |
| Certification | CE, FCC, RoHS, UKCA, RCM |
| General | |
| Manufacturer | WI-TEK |
|---|---|
| Model | Wi-Tek WI-PCES226GF |
| Manufacturer Part No | WI-PCES226GF |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | China |
