Wi-Tek WI-PMS306GF-UPS-I Solar Powered PoE Switch
-
- Brand Store: WI-TEK
- Model: Wi-Tek WI-PMS306GF-UPS-I
- Availability: Out Of Stock
- Part No: WI-PMS306GF-UPS-I
About this item
- Port 1-2: Gigabit PoE output port with 24V passive or 48V 802.3af/at 30W
- Port 3-4: Gigabit PoE output port with 802.3af/at/bt 90W
- Port 5-6: 1000Mbps SFP slot
- DC Input : V1 V2 -- 12-57V max 10A, V3 -- 24V/48V max 10A
- Solar input: 12V/24V max 10A
- Battery input: 12V/24V max 10A
WI-TEK Wi-Tek WI-PMS306GF-UPS-I
Buy Wi-Tek WI-PMS306GF-UPS-I Solar Powered PoE Switch
| WI-PMS306GF-UPS-I V1 Specifications | |
|---|---|
| Model | WI-PMS306GF-UPS-I |
| Hardware Version | V1 |
| Hardware Features | |
| Interface | 2 × 10/100/1000Mbps 24V(passive)/48V(af/at) PoE (auto-detect) RJ45 ports 2 × 10/100/1000Mbps PoE++ (Type 4) RJ45 ports 2 × 1000Mbps SFP ports |
| Console | 1 × RS-232 RJ45 port (38400,8,N,1,N) |
| Power Input Ports | Bottom Panel: - 6-PIN Phoenix (2 × solar input in parallel, 1 × battery charge/discharge) - 2-PIN Phoenix (1 × DC input for battery charging) Top Panel: - 6-PIN Phoenix (2 × DC inputs V1 & V2 for switch, 1 × alarm input) - 2-PIN Phoenix (1 × relay alarm output) |
| LED Indicators | Front Panel: PWR, V1 & V2, RING, 2 × SFP Top Panel: BT, VO, BIN, BOUT, SUN, 7 × Battery Capacity Indicators |
| DIP Switch | Battery type selector: - 12V/24V lead acid - 12.6V/25.2V lithium - 14.8V/29.6V LiFePO4 Wide-voltage charging switch to allow 24V solar to charge 12V battery |
| Buttons | RING SET: Press >10s to form MSTP RING, >15s to disable Reset: Press >10s to restore factory defaults |
| Power Supply Input Range | V1 & V2: 37~57V DC (Enables PoE output, battery charging disabled) 12~37V DC (Disables PoE output, battery charging disabled) |
| Power Consumption | <10W (without PoE), Typical 4.2W |
| PoE Features | |
| PoE Ports | Ports 1–4 |
| PoE Standards | Ports 1–2: IEEE 802.3af/at or 24V Passive PoE (Auto-detect) Ports 3–4: IEEE 802.3bt (Type 4) |
| PoE Pin Assignment | Port 1–2: - af/at: 1/2(+), 3/6(-) - 24V Passive: 4/5(+), 7/8(-) Port 3–4: 1/2/4/5(+), 3/6/7/8(-) |
| PoE Port Power | Ports 1–2: 30W max (af/at) or 24W (24V passive) Ports 3–4: 90W max (Type 4) |
| Total PoE Budget | Max 120W |
| Switching Properties | |
| Standards & Protocols | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at, 802.3bt, 802.3ad, 802.1Q, 802.1p, 802.1D, 802.1w, 802.1s |
| Forwarding Mode | Store and Forward |
| MAC Address Table | 8K |
| Switching Capacity | 12 Gbps |
| Packet Forwarding Rate | 8.94 Mpps |
| Packet Buffer | 4.1 Mb |
| Jumbo Frame | 10240 Bytes |
| Reliability & Environment | |
| ESD Protection | 6kV |
| Surge Immunity | 6kV |
| Operating Temperature | -40°C to 75°C, 10–90% RH (non-condensing) |
| Storage Temperature | -40°C to 80°C, 5–90% RH (non-condensing) |
| Physical | |
| Dimensions (W×D×H) | 67 × 157 × 115 mm |
| Weight | 1.3 kg (Net), 1.49 kg (Package) |
| Package Dimensions | 230 × 165 × 79 mm |
| Installation | DIN-Rail / Desktop / Wall Mounted |
| Material | Metal Shell |
| Color | Black |
| Fan | Fan-less |
| General | |
| Manufacturer | WI-TEK |
|---|---|
| Model | Wi-Tek WI-PMS306GF-UPS-I |
| Manufacturer Part No | WI-PMS306GF-UPS-I |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | China |
