COMMANDO QSFP-SR4-100G FiberX 100GBASE-SR4, QSFP28+, 850nm, 100m, MTP/MPO-12, MMF, DDM, Multi-brand
-
- Brand Store: COMMANDO
- Model: COMMANDO QSFP-SR4-100G
- Availability: Out Of Stock
- Part No: QSFP-SR4-100G
Key features
Supports data rates up to 103.1Gbps for 100G Ethernet and CPRI applications
Compatible with multiple vendors and QSFP28 interfaces
Complies with IEEE 802.3bm 100GBASE SR4, SFF 8665 and SFF 8636 standards
Hot pluggable QSFP28 module with 850nm VCSEL laser transmitter
MTP/MPO 12 male connector for multimode fiber connectivity
Supports transmission distances up to 100m over multimode fiber
Built in Digital Diagnostic Monitoring for performance monitoring
Low power consumption below 1W with a 3.3V power supply
Compatible with multiple vendors and QSFP28 interfaces
Complies with IEEE 802.3bm 100GBASE SR4, SFF 8665 and SFF 8636 standards
Hot pluggable QSFP28 module with 850nm VCSEL laser transmitter
MTP/MPO 12 male connector for multimode fiber connectivity
Supports transmission distances up to 100m over multimode fiber
Built in Digital Diagnostic Monitoring for performance monitoring
Low power consumption below 1W with a 3.3V power supply
| Management Interface | 2 wire serial management interface via I2C bus |
| EEPROM Memory Architecture | Base address 0xA0h with lower and upper memory areas for diagnostic data, page selection, status and control registers, vendor information and advanced configuration |
| Memory Pages | Structured pages including Page 00h and Page 03h for vendor data and control functions |
| DDM Interface | Digital diagnostic parameters accessible through standard register tables at address 0xA2h |
| Diagnostic Monitoring | Real time monitoring of transceiver temperature, supply voltage, laser bias current, transmitted optical power and received optical power |
| Alarm and Warning Flags | Factory calibrated SFF-8472 and SFF-8636 threshold monitoring with automated alerts when operating limits are exceeded |
| CDR Control | I2C software registers support independent TX and RX CDR enabling, disabling and status monitoring |
| General | |
| Manufacturer | COMMANDO |
|---|---|
| Model | COMMANDO QSFP-SR4-100G |
| Manufacturer Part No | QSFP-SR4-100G |
| Compatible Country | South Africa, Oman, Saudi Arab, Iran, Russia |
| Country of Origin | India |
| Dimensions | 9x19x123 cm |
| Weight | 1.000 kg |
