COMMANDO SFP-SR-25G FiberX 25GBASE-SR, SFP28, 850nm, 70/100m, OM3/4 MMF, DDM, Multi-brand
-
- Brand Store: COMMANDO
- Model: COMMANDO SFP-SR-25G
- Availability: Out Of Stock
- Part No: SFP-SR-25G
Key features
Supports data rates up to 25.78Gbps for Ethernet and Fibre Channel
Compatible with multiple vendors and SFP28 interfaces
Complies with IEEE 802.3by 25GBASE SR and relevant SFF standards
Hot pluggable SFP28 module with 850nm VCSEL laser transmitter
Duplex LC connector supporting up to 70m on OM3 and 100m on OM4 multimode fiber
Built in Digital Diagnostic Monitoring for performance monitoring
Supports Clock and Data Recovery on transmit and receive channels
Low power consumption below 1W with a 3.3V power supply
Suitable for 25G Ethernet, Fibre Channel and eCPRI wireless networks
Compatible with multiple vendors and SFP28 interfaces
Complies with IEEE 802.3by 25GBASE SR and relevant SFF standards
Hot pluggable SFP28 module with 850nm VCSEL laser transmitter
Duplex LC connector supporting up to 70m on OM3 and 100m on OM4 multimode fiber
Built in Digital Diagnostic Monitoring for performance monitoring
Supports Clock and Data Recovery on transmit and receive channels
Low power consumption below 1W with a 3.3V power supply
Suitable for 25G Ethernet, Fibre Channel and eCPRI wireless networks
| EEPROM Memory Mapping | SFF-8472 compliant non volatile memory for vendor ID, serial number and product capabilities |
| Digital Diagnostic Interface | 2 wire I2C interface with 0xA0 for serial identification data and 0xA2 for real time diagnostic parameters |
| Forward Error Correction | Supports host-side RS-FEC and Base-R FEC interoperability for error correction and low bit error rates |
| Diagnostic Flags and Alarms | Threshold monitoring for Tx/Rx optical power, supply voltage and laser bias current warnings |
| Multi Rate Configuration | Host-configurable interface rates for potential 10G SFP+ backward compatibility, depending on switch OS support |
| SFF-8431 Management | Host-managed registers for signal control, soft TX disable and enable, and receiver loss of signal indicators |
| General | |
| Manufacturer | COMMANDO |
|---|---|
| Model | COMMANDO SFP-SR-25G |
| Manufacturer Part No | SFP-SR-25G |
| Country of Origin | India |
| Dimensions | 57x13x9 cm |
| Weight | 1.000 kg |
