Fortinet FortiAP 241K-E Wi-Fi 7 Indoor Wireless Access Point - FAP-241K-E
-
- Brand Store: Fortinet
- Model: Fortinet FortiAP 241K-E
- Availability: Out Of Stock
- Part No: FAP-241K-E
Key features
Wi-Fi 7 Performance: Built on the 802.11be standard to provide high-speed, low-latency connectivity across 2.4 GHz, 5 GHz, and 6 GHz bands.
Dedicated Security Radio: Features a quad-radio design with a 4th dedicated radio for 24/7 continuous rogue AP detection, threat mitigation, and RF scanning.
10 GbE Multi-Gig Uplink: Includes a 10 GBase-T Ethernet port to eliminate wireline bottlenecks and safely transport high-capacity wireless traffic.
Fortinet Fabric Integration: Seamlessly managed via a FortiGate firewall to extend advanced security policies, web filtering, and ZTNA directly to the wireless edge.
Dedicated Security Radio: Features a quad-radio design with a 4th dedicated radio for 24/7 continuous rogue AP detection, threat mitigation, and RF scanning.
10 GbE Multi-Gig Uplink: Includes a 10 GBase-T Ethernet port to eliminate wireline bottlenecks and safely transport high-capacity wireless traffic.
Fortinet Fabric Integration: Seamlessly managed via a FortiGate firewall to extend advanced security policies, web filtering, and ZTNA directly to the wireless edge.
| Fortinet FortiAP 241K-E Specifications | |
|---|---|
| Hardware | |
| Hardware Type | Indoor AP |
| Number of Radios | 4-Radio: 2.4 GHz + 5.0 GHz + 6 GHz + Tri-Band Scanning |
| Number of Antennas | 6 Internal Wi-Fi Antennas: 2 Dual-Band, 2 6 GHz Band, 2 Tri-Band Scanning; 1 Internal 2.4 GHz BLE/ZigBee Antenna |
| Antenna Type | Internal PIFA and Alford Loop Antennas |
| Antenna Type and Peak Gain | PIFA 2.4/5 GHz Dual-Band Antenna: 4.7 dBi at 2.4 GHz, 5.4 dBi at 5 GHz Alford Loop 6 GHz Antenna: 5.7 dBi at 6 GHz PIFA Tri-Band Antenna: 5.0 dBi at 2.4 GHz, 5.7 dBi at 5 GHz, 5.35 dBi at 6 GHz PIFA BLE Antenna: 4.6 dBi at 2.4 GHz |
| Frequency Bands | 2.4 GHz: ISM 2.4–2.484 GHz 5 GHz: UNII-1 (5.15–5.25 GHz), UNII-2A (5.25–5.35 GHz), UNII-2C (5.47–5.73 GHz), UNII-3 (5.725–5.85 GHz), UNII-4 (5.85–6.895 GHz) 6 GHz: UNII-5 (5.925–6.425 GHz), UNII-6 (6.425–6.525 GHz), UNII-7 (6.525–6.875 GHz), UNII-8 (6.875–7.125 GHz) |
| Radio Capabilities | |
| Radio 1 Capabilities | 2.4 GHz; 20/40 MHz Channel Width; BPSK, QPSK, 64/256/1024 QAM; 2x2 Service MIMO |
| Radio 2 Capabilities | 5 GHz UNII-1 to UNII-4; 20/40/80/160/240 MHz Channel Width; BPSK, QPSK, 64/256/1024/4096 QAM; 2x2 Service MIMO |
| Radio 3 Capabilities | 6 GHz UNII-5 to UNII-8; 20/40/80/160/320 MHz Channel Width; BPSK, QPSK, 64/256/1024/4096 QAM; 2x2 Service MIMO |
| Radio 4 Capabilities | 2.4/5/6 GHz; 20/40/80/160 MHz Channel Width; BPSK, QPSK, 64/256/1024 QAM; 2x2 Scanning MIMO |
| Maximum Data Rate | 2.4 GHz: Up to 688 Mbps; 5 GHz: Up to 4.324 Gbps; 6 GHz: Up to 5.765 Gbps |
| Bluetooth Low Energy Radio | Bluetooth Scanning and iBeacon Advertisement at 10 dBm Maximum TX Power |
| GNSS | Not specified |
| Interfaces and Connectivity | |
| Ethernet Interfaces | 1 x 100M/1000M/2.5G/5.0G/10G Multigigabit Ethernet RJ45; 1 x 10M/100M/1000M Ethernet RJ45 |
| USB Interface | 1 x USB 2.0 Type-A, 2.5 W |
| Console Port | 1 x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | 1 x 802.3bt PoE (Default) |
| Simultaneous SSIDs | Up to 24 |
| EAP Types | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA, WPA2, WPA3 with 802.1X or Pre-Shared Key, WEP, Web Captive Portal, MAC Blacklist and Whitelist |
| Maximum TX Power (Conducted) | 2.4 GHz: 25 dBm / 316 mW (2 Chains Combined); 5 GHz: 26 dBm / 400 mW (2 Chains Combined); 6 GHz: 23 dBm / 200 mW (2 Chains Combined at 320 MHz Bandwidth) |
| Kensington Lock | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11be, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1X, 802.3ad, 802.3at, 802.3bt, 802.3az |
| Supported SSID Modes | Local-Bridge, Mesh, and Tunnel |
| Per-Radio Client Capacity | Up to 512 Clients per Radio (Radio 1, Radio 2, and Radio 3) |
| Cellular Co-existence | Yes |
| LED Off Mode | Yes |
| Advanced 802.11 Features | |
| OFDMA | Yes (UL and DL) |
| Spatial Reuse (BSS Coloring) | Yes |
| UL MU-MIMO | Yes |
| DL MU-MIMO | Yes |
| Enhanced Target Wake Time (TWT) | Yes |
| ZeroWait DFS | No |
| Security and Wireless Monitoring | |
| UTP Capable | No |
| UTP Features | N/A |
| Rogue Scan Radio Modes | Background, Dedicated |
| WIPS / WIDS Radio Modes | Background, Dedicated (Recommended) |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
| Physical Specifications | |
| Dimensions (L x W x H) | 7.48 x 7.48 x 2.01 inches (190 x 190 x 51 mm) |
| Weight | 2.4 lbs (1.09 kg) |
| Package (Shipping) Weight | 4.4 lbs (2.0 kg) |
| Mounting Options | Ceiling, T-Rail, and Wall |
| Included Accessories | Standard Mounting Kit for Ceiling, T-Rail, and Wall |
| Power and Environmental Specifications | |
| Power Supply | 802.3bt PoE: GPI-145; 802.3at PoE: GPI-130 (USB Disabled); or 12V, 2.5A, 30W DC Power Supply SP-FAP200-PA-XX |
| Maximum Power Consumption | 26.1 W |
| Humidity | 5%–90% Non-Condensing |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -22°F to 158°F (-30°C to 70°C) |
| Directives | Low Voltage Directive, RoHS |
| UL 2043 Plenum Material | Yes |
| Mean Time Between Failures | > 10 Years |
| IP Rating | N/A |
| Built-in Surge Protection | Yes |
| Hit-less PoE Failover | N/A |
| Certifications | |
| Wi-Fi Alliance Certified | No |
| DFS | No |
| General | |
| Manufacturer | Fortinet |
|---|---|
| Model | Fortinet FortiAP 241K-E |
| Manufacturer Part No | FAP-241K-E |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California,USA |
