Kingston KVR26S19D8/16 16GB 2Rx8 2G x 64-Bit PC4-2666 CL19 260-Pin SODIMM Desktop RAM
-
- Brand Store: Kingston
- Model: Kingston KVR26S19D8/16
- Availability: Out Of Stock
- Part No: KVR26S19D8/16
Key features
This document describes Value RAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.
Kingston Kingston KVR26S19D8/16
#1: Power Supply: VDD = 1.2V Typical
#2: VDDQ = 1.2V Typical
#3: VPP = 2.5V Typical
#4: VDDSPD = 2.2V to 3.6V
#5: Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
#6: Low-power auto self refresh (LPASR)
#7: Data bus inversion (DBI) for data bus
#8: On-die VREFDQ generation and calibration
#9: Single-rank
#10: On-board I2 serial presence-detect (SPD) EEPROM
#11: 8 internal banks; 2 groups of 4 banks each
#12: Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
#13: Selectable BC4 or BL8 on-the-fly (OTF)
#14: Fly-by topology
#15: Terminated control command and address bus
#16: PCB: Height 1.18” (30.00mm)
#17: RoHS Compliant and Halogen-Free
Download Kingston KVR26S19D8/16 Datasheet
| General | |
| Manufacturer | Kingston |
|---|---|
| Model | Kingston KVR26S19D8/16 |
| Manufacturer Part No | KVR26S19D8/16 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |
