Ubiquiti UA-G2
Ubiquiti UA-G2
Ubiquiti UA-G2 
General
Manufacturer UBIQUITI
Model Ubiquiti UA-G2
Manufacturer Part No UA-G2
Compatible Country Middle East, Africa, Iran, Dubai
Country of Origin California

Ubiquiti UA-G2 G2 Reader

  • UBIQUITI
  • Brand Store:  UBIQUITI   decoration   decoration
  • Model: Ubiquiti UA-G2
  • Availability: Out Of Stock
  • Part No: UA-G2

Key features

Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking. #1: Unlock using an NFC card or UniFi Identity mobile app #2: Additional handwave unlock functionality #3: Entry and exit greeting messages #4: Connects to UniFi Access Hub using PoE #5: IP55 weather resistance (-30 to 45 C)

Ubiquiti UA-G2

Mechanical Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") Enclosure material Polycarbonate, glass Mounting In wall, gang box Weatherproofing IP55 Hardware Networking interface (1) 10/100 MbE RJ45 port Connectivity BLE 4.1 Power method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 5W ESD/EMP protection Air: +15kV, contact: +8kV Sensors Proximity sensor Speaker (1) 8 ohm, 0.7W LEDs Steady white: Pending adoption Steady blue: Adopted Alternating white/blue: Firmware updating Strobing red: Emergency lockdown Steady green: Emergency evacuation (2) Rapid flashing blue: NFC credential authenticated (2) Rapid flashing red: NFC credential authentication failed Breathing blue: Ready to register NFC cards Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire Operating environment Outdoor use Ambient operating temperature -30 to 45 C (-22 to 113 F) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02 Software Management application UniFi Access: Version 1.5.9 and later



show more
General
Manufacturer UBIQUITI
Model Ubiquiti UA-G2
Manufacturer Part No UA-G2
Compatible Country Middle East, Africa, Iran, Dubai
Country of Origin California

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Track Your Order Here Whatsapp +97142380921