Ubiquiti UA-G2-Pro Second-generation NFC card reader and intercom - White
AED 1,523
- Inclusive of VAT
-
- Brand Store: UBIQUITI
- Model: Ubiquiti UA-G2-Pro
- Availability: In Stock
- Part No: UA-G2-Pro
Key features
#1: Unlock using an NFC card or UniFi Identity mobile app #2: Doorbell for unlock with video of visitor and two-way intercom #3: Video works at ADA-compliant mounting height #4: PIN unlocking on the screen #5: Connects to UniFi Access Hub using PoE #6: IP55 rain resistance (-10 to 45 C)

AED 1,523
- Inclusive of VAT
-
or 4 payments of AED380.75 No interest, no fees. Learn more
-
*Get it in 1-3 hours
- Fulfilled by Terrabyt
- Condition: New
-
Deliver To UAE
Free Delivery Today, Nov 18If you order before 6PM
- For Corporate customer
Ubiquiti UA-G2-Pro
Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) GbE RJ45 port Connectivity BLE 4.2 NFC Power method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: +15kV, contact: +8kV Sensor Proximity sensor Camera 4000 x 3000, 12 MP, 30 FPS View angle H: 96.67, V: 123.15, D: 153.11 Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/W Flash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire Operating environment Outdoor use Ambient operating temperature Device: -30 to 45 C (-22 to 113 F) Display: -10 to 45 C (14 to 113 F) The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28) Ambient operating humidity 5 to 90% noncondensing UL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 LED System Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware Strobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and laterDownload Ubiquiti UA-G2-Pro Datasheet
| General | |
| Manufacturer | UBIQUITI |
|---|---|
| Model | Ubiquiti UA-G2-Pro |
| Manufacturer Part No | UA-G2-Pro |
| EAN Code | 810084691656 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Product HS Code | 85176290 |
| Country of Origin | California |
| Price | AED 1,523 |




















