General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-Intercom-Viewer-3
Manufacturer Part No	UA-Intercom-Viewer-3
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California

Ubiquiti UA-Intercom-Viewer-3 Intercom Viewer - 3 Pack

Brand: UBIQUITI
Model: Ubiquiti UA-Intercom-Viewer-3
Availability: Out Of Stock
Part No: UA-Intercom-Viewer-3
Chat with Terrabyt.com Bulk Requirement

About this item

Display that works with Intercom and G2 Reader Pro for visitor screening and remote access control.

#1: Receives doorbell calls from one or more locations

#2: Two-way audio

#3: Instant live view

#4: 5" touch display

#5: Connect and power using a PoE switch

1 reviews / Write a review

Mechanical
Dimensions	135 x 72 x 31.8 mm (5.3 x 2.8 x 1.3")
Weight	168 g (5.9 oz)
Enclosure materials	Glass, polycarbonate
Mount material	Aluminum alloy
Mounting	Wall (Included) Gang box mount (Gang box not included)
Hardware
Networking interface	(1) 10/100 Mbps RJ45 port
Management interface	Ethernet
Power method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range	44–57V DC
Max. power consumption	5W
Display	127 mm (5") diagonal
Resolution	720 x 1280 (9:16)
Display luminance	300 nits (typical)
Touch screen technology	Capacitive multi-touch
Screen orientation	Portrait
Microphone	Yes
Speaker	Yes
Button	Factory reset
Ambient operating temperature	0 to 40° C (32 to 104° F)
Operating environment	Indoor use only
Ambient operating humidity	5 to 95% noncondensing
Software information	The software version of a product can be checked at https://unifi.ui.com
UL 294 level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements	Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ² ) for patch cords; 24 AWG (0.21 mm ² ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-Intercom-Viewer, V01
Software
Management application	UniFi Access: Version 1.22.17 and later

General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-Intercom-Viewer-3
Manufacturer Part No	UA-Intercom-Viewer-3
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California