Wi-Tek WI-PCES326GF V2 24*10/100/1000Mbps RJ45 Ports, 2*1000Mbps SFP Slots Cloud Easy smart PoE switch
-
- Brand Store: WI-TEK
- Model: Wi-Tek WI-PCES326GF V2
- Availability: Out Of Stock
- Part No: WI-PCES326GF-V2
Key features
- 24 x 10/100/1000Mbps RJ45 Ports, 2*1000Mbps SFP Slots
- 24 x 802.3af/at PoE+ ports, total PoE power of up to 370W
- Support Wi-Tek Cloud management for real-time monitoring and remote configuration
- Support port automatic anti-loop to ensure network continuity
- Support alarm notifications, easy to maintain in real time
- Support Onvif protocol to automatically identify IP camera
- Support link aggregation for increasing the network bandwidth and reliability.
- Support QoS to ensure high-priority services can work normally
WI-TEK Wi-Tek WI-PCES326GF V2
Buy Wi-Tek WI-PCES326GF V2 24*10/100/1000Mbps RJ45 Ports, 2*1000Mbps SFP Slots Cloud Easy smart PoE switch
| WI-PCES326GF V2 Specifications | |
|---|---|
| Model | WI-PCES326GF |
| Hardware Version | V2 |
| Interfaces | |
| Downlink Ports | 24 × 10/100/1000BASE-T RJ45 Ports |
| Uplink Ports | 2 x 1000Mbps SFP Slots |
| PoE | |
| PoE Ports | Ports 1–24: IEEE 802.3af/at |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Supply Type | End-span |
| PoE Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power |
30W Max. for each port,
370W Max. for PoE power budget
|
| Performance | |
| Memory & Flash | 128K DDR3, 16MB Flash |
| Switching Capacity | 52 Gbps |
| Packet Forwarding Rate | 38.68 Mpps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4.1 Mbit |
| Jumbo Frame | 9 KB |
| Standards & Protocols | |
| Protocol |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z, IEEE 802.3x, IEEE 802.1x, IEEE802.1q,
IEEE 802.1p, IEEE802.3af, IEEE802.3at
|
| Forwarding Mode | Store and Forward |
| Power Supply | |
| Input Power | AC 100–240V, 50/60Hz |
| Power Consumption | Idle: 12W 100% Traffic Rate with PoE: 382 W |
| LED Indicators | |
| PWR Indicator | PWR Indicator: On: the device power on is normal Off: the device is power off or failed |
| Link Indicator |
Link Indicator: Off: No device is connected to the corresponding port.
On: Indicates the link through that port is successfully established
Blinking: Indicates that the Switch is actively sending or receiving data over that port.
|
| PoE Indicator |
PoE Indicator:
Off: No PoE powered device (PD) connected. On: There is a PoE PD connected to be port, which supply power successfully. Blinking: Indicates the port is abnormal. SFP Indicator:
On: port connected Off: Port disconnected. Blinking:Data transmission |
| Reset Button | Hold >5 sec to restore factory defaults |
| Physical Characteristics | |
| Fan Quantity | 2 |
| Dimensions (W×D×H) | 440 × 207 × 44 mm |
| Weight | Net Weight: 2.78kg, Package Weight: 3.46kg |
| Installation | Rack-Mounted |
| Environmental | |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% RH (non-condensing) |
| Storage Humidity | 5% to 90% RH (non-condensing) |
| Reliability | |
| Surge Immunity | Common mode: ±4kV, Differential mode: ±2kV |
| ESD Protection | Contact: ±6kV, Air: ±8kV |
| Certification | CE, FCC, RoHS, UKCA, RCM |
| General | |
| Manufacturer | WI-TEK |
|---|---|
| Model | Wi-Tek WI-PCES326GF V2 |
| Manufacturer Part No | WI-PCES326GF-V2 |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | China |
