APC BK500EI Back-UPS, 500VA/300W, Tower, 230V, 4x IEC C13 Outlets , User Replaceable Battery
-
- Brand Store: APC
- Model: APC BK500EI
- Availability: Out Of Stock
- Part No: BK500EI
Key features
This product is part of the Back-UPS range. The BK550EI features a total of 6 power outlets, 3 of which are UPS battery backup and 3 that are surge only. Its runtime at 100W is 24 minutes 20 seconds It provides data line protection with a RJ45 analog phone line for phone or fax or modem or DSL. Its dimensions are 16.5 x 9.1 x 28.4 cm and 6.32kg. The BK550EI ensures office systems and their valuable data are protected from dangerous power surges, spikes and blackouts.
| UPS Specifications – 300W / 500VA | |
|---|---|
| Main | |
| Run Time for Load | 300 W (Min-max: 30–300 W) |
| Runtime Duration | 3 min 48 s |
| Max Capacity Used | 100 % |
| Main Input Voltage | 230 V |
| Main Output Voltage | 230 V |
| Rated Power in W | 300 W |
| Rated Power in VA | 500 VA |
| Product or Component Type | Uninterruptible Power Supply (UPS) |
| Input Connection Type | IEC 60320 C14 |
| Output Connection Type | 3 x IEC 60320 C13 1 x IEC 60320 C13 (Surge only) 2 x IEC Jumpers (Surge only) |
| Number of Cables | 2 |
| Battery Type | Lead-acid battery |
| Range of Product | Back-UPS |
| Provided Equipment | CD with software Documentation CD 1 x detachable IEC power cord 1 x detachable 1.2 m IEC power cord Telephone cable USB cable |
| Batteries & Runtime | |
| Run Time | View Runtime Graph |
| Efficiency | View Efficiency Graph |
| Battery Filled Slots | 0 |
| Battery Free Slots | 0 |
| Battery Recharge Time | 8 h |
| Battery Replacement Quantity | 1 |
| Battery Voltage | 12 V |
| Battery Capacity | 7.0 Ah |
| Battery Charger Power | 10 W (Rated) |
| Battery Power in VAh | 83 VAh (capacity), 84 VAh (runtime) |
| Battery Life | 4–6 year(s) |
| Replacement Battery | RBC2 |
| Extended Runtime | 0 |
| General | |
| Power Module Free Slots | 0 |
| Power Module Filled Slots | 0 |
| Redundant | No |
| Physical | |
| Color | Beige |
| Height | 165 mm |
| Width | 91 mm |
| Depth | 284 mm |
| Mounting Location | Front |
| Mounting Preference | No preference |
| Mounting Mode | Not rack-mountable |
| Two Post Mountable | 0 |
| USB Compatible | No |
| Input | |
| Network Frequency | 47–63 Hz / 50/60 Hz ± 3 Hz Auto-sensing |
| Input Voltage Limits | 160–300 V (adjustable), 180–266 V |
| Maximum Input Current | 7 A |
| Switching Current Capacity | 7 A |
| Output | |
| Max Configurable Power (W) | 300 W |
| Max Configurable Power (VA) | 500 VA |
| Output Frequency | 47–63 Hz (sync to mains), 50/60 Hz ± 1 Hz (unsynchronized) |
| UPS Type | Standby |
| Wave Type | Stepped approximation to a sinewave |
| Transfer Time | 6 ms typical, 10 ms maximum |
| Conformance | |
| Product Certifications | C-Tick, CE, GOST, VDE |
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
| Environmental | |
| Operating Temperature | 0–40 C |
| Relative Humidity | 0–95 % |
| Operating Altitude | 0–10000 ft |
| Storage Temperature | -15–45 C |
| Storage Relative Humidity | 0–95 % |
| Storage Altitude | 0–15240 m |
| Acoustic Level | 40 dBA |
| Heat Dissipation | 24 Btu/h |
| Communications & Management | |
| Free Slots | 0 |
| Control Panel | LED status display with indicators: – On Line – On Battery – Replace Battery – Overload |
| Alarm | – Alarm when on battery – Distinctive low battery alarm – Overload continuous tone alarm |
| Surge Protection and Filtering | |
| Surge Energy Rating | 310 J |
| Noise Suppression | – Full-time multi-pole noise filtering – 5% IEEE surge let-through – Zero clamping response time – Meets UL 1449 |
| General | |
| Manufacturer | APC |
|---|---|
| Model | APC BK500EI |
| Manufacturer Part No | BK500EI |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | USA |
