Huawei AP572 11be indoor,2+4 dual bands,smart antenna,USB Access Point - 50088143
-
- Brand Store: Huawei
- Model: Huawei AP572
- Availability: In Stock
- Part No: 50088143
Key features
- Supports the latest Wi-Fi 7 (802.11be) technologies, including multi-link operation (MLO), multi-user multiple-input, multiple-output (MU-MIMO), 160 MHz channel width, and 4096-quadrature amplitude modulation (QAM).
- Performance: It can deliver a combined access rate of up to 6.45 Gbps across its 2.4 GHz and 5 GHz frequency bands.
- Design: Features a round, sleek design with a 220 mm diameter that can be installed on a wall, ceiling, or rail.
Huawei Huawei AP572
| Device Specifications | |
|---|---|
| Installation Type | Wall Ceiling (Solid Wall, Gypsum Board, Spring Tee, Flat-Edge T-Rail, Channel Rail, Beam, Threaded Rod) Junction Box (86 mm, 1-Gang 120 mm, Octagonal, 2-Gang 120 mm) |
| Dimensions without packaging (H x W x D) | Diameter x Depth: 220 mm x 45 mm (8.66 in. x 1.77 in.) |
| Dimensions with packaging (H x W x D) | 72 mm x 260 mm x 255 mm (2.83 in. x 10.24 in. x 10.04 in.) |
| Storage | NAND Flash 512 MB |
| Console Port | None |
| Maximum Power Consumption | 14.8 W (excluding USB) |
| Maximum Heat Dissipation | 48.0 BTU/hour |
| Power Supply Mode | PoE, DC Power Adapter |
| Rated Input Voltage | DC: 12 V PoE: 802.3at/af |
| Input Voltage Range | DC: 12 V + 10% PoE: 802.3at/af |
| Service Port Surge Protection | PoE Port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 μs, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 μs, 42 ohms), criterion B |
| PoE OUT | Not supported |
| Types of Fans | None |
| Max Number of Physical Ports | 1 x 2.5GE (RJ45), 100M/1000M/2500M auto-sensing 1 x GE (RJ45), 10M/100M/1000M auto-sensing |
| Long-term Operating Temperature | –10C to +50C (14F to 122F) (From 1800 m to 5000 m, max ambient temp decreases by 1°C every 300 m) |
| Storage Temperature | –40C to +70C (–40F to +158F) |
| Operating Humidity | 5% RH to 95% RH, non-condensing |
| Operating Altitude | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric Pressure | 53 kPa - 106 kPa (ETSI 300 019-2-3) |
| Ground | Floating ground |
| USB | Supplies power of 2.5 W or 5 W |
| IoT Slot | Not supported |
| BLE | Not supported |
| Radio Number | 2 |
| Operating Frequency Band | 2.4 GHz, 5 GHz |
| MIMO Spatial Streams | Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 4x4 |
| Wi-Fi Standard | 2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be |
| Radio Interface | Built-in smart antennas |
| Antenna Gain | 2.4 GHz: 4 dBi/chain (peak gain), 2 dBi (combined gain) 5 GHz: 5 dBi/chain (peak gain), 3 dBi (combined gain) |
| Maximum Transmit Power | 2.4 GHz: 20 dBm/chain, 23 dBm (combined) 5 GHz: 20 dBm/chain, 26 dBm (combined) |
| Signal Radio Transmit Power | 2.4G: –10 dBm to 20 dBm/chain 5G: –10 dBm to 20 dBm/chain |
| MTBF (Mean Time Between Failures) | 138.501 years |
| MTTR (Mean Time To Repair) | 2 hours |
| Frequency Stability | + 20 ppm |
| 802.3bt Power Supply | Negotiated to 802.3at, no function restricted |
| 802.3at Power Supply | Negotiated to 802.3at, no function restricted |
| 802.3af Power Supply | Radio mode limited to 2.4 GHz (2x2) + 5 GHz (2x2) USB port unavailable Other functions not restricted |
| DC Power Supply | No function is limited |
| General | |
| Manufacturer | Huawei |
|---|---|
| Model | Huawei AP572 |
| Manufacturer Part No | 50088143 |
| Compatible Country | Middle East, Africe, Iran, Dubai |
| Country of Origin | China |
| Price | AED 684 |
