Kingston KSM26ES8/8MR 8GB 1Rx8 1G x 72-Bit PC4-2666 CL19 288-Pin DIMM
-
- Brand Store: Kingston
- Model: Kingston KSM26ES8/8MR
- Availability: Out Of Stock
- Part No: KSM26ES8/8MR
Key features
Kingston's KSM26ES8/8MR is a 1G x 72-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Kingston KSM26ES8/8MR
• Power Supply: VDD = 1.2V Typical• VDDQ = 1.2V Typical• VPP = 2.5V Typical• VDDSPD = 2.2V to 3.6V• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals• Low-power auto self refresh (LPASR)• Data bus inversion (DBI) for data bus• On-die VREFDQ generation and calibration• Single-rank• On-board I2 serial presence-detect (SPD) EEPROM• Temperature sensor with integrated SPD• 16 internal banks; 4 groups of 4 banks each• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)• Selectable BC4 or BL8 on-the-fly (OTF)• Fly-by topology• Terminated control command and address bus• PCB: Height 1.23” (31.25mm)• RoHS Compliant and Halogen-FreeDownload Kingston KSM26ES8/8MR Datasheet
| General | |
| Manufacturer | Kingston |
|---|---|
| Model | Kingston KSM26ES8/8MR |
| Manufacturer Part No | KSM26ES8/8MR |
| Compatible Country | Middle East, Africa, Iran, Dubai |
| Country of Origin | California |




















